<< Click to Display Table of Contents >> Navigation: Initiatives > Design > Curriculum Development > Initiatives > Design > Curriculum Development > Module Level |
What can you do on this screen?
Only initiatives with a Scope listed below have a module level, though the name will vary depending on the Scope (called Module Level in this manual):
•Course / Distance Learning Course: Module
•Module / Distance Learning Module - top level of the initiative: Module
•Manual - top level of the initiative: Manual
•On-the-Job Training (OJT) - top level of the initiative: On-the-Job Training
•Performance Support - top level of the initiative: Performance Support
Figure 125: Curriculum Development > Module Level
For initiatives where the Module Level is the top level of the initiative, any field differences are marked "- Top Level Only" or "- Lower Level Only" as needed. On this screen, you can use Add Missing to automatically create the basic table of contents structure based on the objectives. Once you've built the basic structure, you have the following actions available to you:
•Add a Assessment.
•View the module level by clicking on the relevant folder.
•Edit the information (including the title for modules and below, but not the Status - you can edit the Status on the Develop tab).
•Resequence the items below the selected item in the tree structure.
•Select Show History to review the changes made to the information, including the user name and date/time of saved changes, and revert to an earlier saved revision.
•Preview the table of contents outline (structure of your initiative with applicable objectives).
•Delete an item at the module level or below (provided no content exists on the Develop tab). Once you've selected OK to the confirmation message, the Training Outline Deletion screen displays. Enter the title of the table of contents item to confirm the deletion.
Note: You can copy and paste the title from the screen into the field to make it easier on yourself. If you only enter a partial title, the item will not be deleted and the Training Outline Deletion screen stays open, ready for you to try again.
•Select Explain Flag to review the reasons the table of contents item has been flagged.
•Add Missing to create new table of contents items based on newly added learning objectives (this is only available for the highest-level folder, for a Module, or Distance Learning Module initiative).
•Expand all sub-folders at once down to the lowest level.
•View/Edit the Design Considerations at every level that gather information about the table of contents item to help with the development of the learning event.
1.Select the Course Level folder. 2.Select and then Module from the list. 3.Enter the desired data. For field information go to Editing Module Level Data below. 4.Select Save to save the new module or select Cancel to close the COI Detail pop-up without saving the new module. |
Select Edit to make changes, then select Save to keep the changes or Cancel to return to the Module Level screen. Figure 126: Curriculum Development > Module Level Edit
Initiative ID - Top Level Only For the top level of the initiative, this is set to the Initiative ID and cannot be changed. You can edit the Identifier field at all other levels. Identifier - Lower Level Only The Identifier is the human-readable identification of the table of contents item. This can be any mix of characters and numbers. For example, the first two to four letters identify the initiative subject area, the second three numbers identify the level of the initiative, followed by the first letter of the scope, while the last two numbers identify the year the initiative will start to be used. For example, a Kitchen Design module's ID could be: KD-101-M-18. Module Title The full name or Module Title of the module. Version The Version number of this table of contents item. All table of contents items start with version 1. Once the initiative has been approved, changes can no longer be made, unless a new version of the initiative is created. Then changes can be made as needed for the new version. When viewing the table of contents item, you can view a previous version (except for the main initiative level) by selecting it from the Version drop-down. Status The Status of the table of contents item from lowest to highest status: •Incomplete - the table of contents item is a work in progress and/or is missing some required data as defined in a business rule. •Complete - the table of contents item is complete. •Lock for Review oThe table of contents item is complete and ready for review. oYou can only edit the table of contents item, if you have the Review privilege assigned to your role. oTo change the Status to Lock for Review, you need the Edit or Review privilege assigned to your role. oTo change the Status back to Incomplete or Complete, you need the Review privilege assigned to your role. •Locked oThe table of contents item is complete and has been reviewed, no more work is allowed. oNo one can edit the table of contents item and any related content without unlocking the item first. oTo change the Status to Locked, you need the Lock privilege assigned to your role. oTo change from Locked to any other status, you need the Unlock privilege assigned to your role. •Approved oThe table of contents item is approved when the initiative is approved. oNo more changes can be made; you must create a new version of the initiative in order to make changes. When you save a change in Status or lock the table of contents item on the Develop tab, the required Business Rules will run to check whether anything is missing or incorrect for the table of contents item or any of its children. Any identified issues are listed on the Business Rules Results screen. If you increase the Status of the table of contents item (say from Incomplete to Complete), all subordinate/child items of the table of contents item will also be changed to that status, if they have a lower status. If you decrease the Status of the table of contents item (say from Lock for Review to Complete), the status of all parent/higher items will be decreased to be no higher than that value, and any subordinate/child items statuses will not change. For example, an Incomplete lesson has one section that is Incomplete, one section that is Complete, and one section that is Locked. If the lesson is changed to Lock for Review, the Incomplete and Complete sections are changed to Lock for Review. The Locked section remains Locked, as it has a higher status. If the Status of the Locked section is changed to Complete, the lesson is changed to Complete (as would the course and module, if their status was above Complete). The remaining sections' statuses are unchanged. The Delivery Method of this table of contents item. You have the following options under the Curriculum Development folder on the Design tab: •IMI - Interactive Multimedia Instruction. •Instructor-Led - or facilitator led. •Blended - using a mix of IMI and Instructor-Led. •EPSS - Electronic Performance Support System. |
You can enter design consideration information to help with the development of any table of contents item. On any screen that displays a Design Considerations link, click that link to display the Design Considerations Detail screen. Once you've opened the Design Considerations Detail screen, you can: •Add a Text entry to a selected tab (heading) and convert it to a Note, Caution, Warning entry. •Paste a copied Text, Note, Caution, or Warning entry to the end of the list of entries. •Select Explain Flag to review the reasons an item on the design considerations has been flagged. •Edit a selected Text, Note, Caution, or Warning entry. •Delete a selected Text, Note, Caution, or Warning entry. Once you've selected OK to the confirmation message, an Undo button displays on the bottom left of the screen that allows you to revert the deletion. •Copy /Paste a selected Text, Note, Caution, or Warning entry. •Move a selected Text, Note, Caution, or Warning entry Up or Down in the list of entries to resequence the list of entries. Select in the top right of the screen to close the Design Considerations Detail screen. On the Module Overview screen, you can enter an overview or description of the module. You may wish to copy and paste the text from the Training Management Document > Initiative Overview screen to give you a starting point. This overview should include the recommended sequence of the content and any interrelationships. Figure 127: Design Considerations - Learning Strategy
In the Learning Strategy field, you can describe the strategies to be used in designing and implementing the presentation of material, including the instructional media, as well as the methods of interactions within the content and with the instructor(s) and participants. Training strategies should be included here, too. Here are some things to include: •Statements as to what type of behavior the participant must show in order to master the learning objectives. •A list of the facts to be memorized, the critical attributes of a concept, the steps to follow in applying a rule or procedure, or the cause-and-effect relationship of a principle. •A list of the aids that shall be included in the instructional content to help the participant recall. •A list of the most common errors made by participants when learning. •A description of the theoretical basis of each instructional strategy used. For Shareable Content Object (SCO) include: •A description of the SCO specifications and metadata tagging requirements to ensure the SCO can work across platforms and systems, along with information on how to reuse the SCO. •A description of the level of granularity for the SCO to be applied within the lesson and the rationale for the level of granularity applied. •A list of the metadata tags required for each SCO in final deliverable format (i.e., compressed or uncompressed) as an element of a course or lesson. •A list of the metadata tags required for each original uncompressed format media object. Figure 128: Design Considerations - Test/Assessment Strategy
In the Test/Assessment Strategy field, you can describe the specific strategies and procedures that will ensure testing is completed at appropriate times and at the appropriate levels. You can identify the objectives to be tested in this field, along with the testing method. Include a description of: •What type of behavior the participant must show in order to master the learning objectives. •Each type of scenario that is to be included in the practice, and test items. A table shall be provided listing the total number of practice and test items that the content author must produce for each type of scenario. •The test types, their sequence and frequency. •The test interface (on paper or electronic) and test marking procedures. •The remediation options. •How the performance of individual participants will be tracked. Figure 129: Design Considerations - Keyword Listing
In the Keyword Listing field, you can enter keywords that could be used to find matching content in another system (for example, if another system is used to complete the development of e-learning). Points of Contact Figure 130: Design Considerations - Points of Contact
The Points of Contact area lists the personnel and places involved for this table of contents item. ISD Personnel The ISD Personnel (instructional system design) working on this table of contents item. Initiative Manager The name of the Initiative Manager working on this initiative. Content SME The name(s) of the Content SME(s) (subject matter expert(s)) working on this table of contents item. Production Facility The name of the Production Facility responsible for this table of contents item. Graphics/Media Personnel The name(s) of the Graphics/Media Personnel working on this table of contents item. |